I’ve always been a big fan of recycling and buying bags or notebooks made out of recycled materials, so the DIY projects made sense. The best tutorial I found is from the site “How About Orange.” The tutorial has very structured steps to make tiny little newspaper bags. So I modified the steps and created magazine wine bags.
Now that I’m a legal drinking citizen, what better way to recycle my fashion magazines, which I’ve stored since 2008, than to make wine bags? They are sophisticated, fun, and environmentally friendly. For a friend you can buy a cheap bottle of wine and give a handmade bag – it’s a win-win. I’m not trying to sell this tutorial, I’m just excited that I created something and I’m proud. I hope you take a few minutes to try my tutorial and tell me what you think. It takes a little time and some patience. But in the end, recipients of these wine bags will be so delighted to have wine and a topic starter (your bag!).
So prepare yourself, because you might have to get use to hearing that you are exceptionally crafty, ingenious, creative, resourceful, and environmentally conscious. This project should take you about 15 minutes the first time, but after your first bag, it will be quicker. The bags will be 9.5” tall, 5 ” wide, and 3.5″ deep. If you complete this craft and want to revel in your success, please let me know how it went. Modifications are always welcome! I know friends and family will love these; mine sure did. Just follow these nine steps and enjoy!
- Old magazines (you can use covers or the pages)
- Tape and Glue sticks
- Card-stock/ Cardboard
- Hemp twine (you may use ribbon, rope, etc)
- Single Hole Punch
Steps to success:
1. Take two sheets of magazine pages (or the front & back cover). Attach the sheets with tape. This should measure about 17.5″ in width. If you opt to using magazine pages (I did this), you will need to double layer your pages (glue is the best way) to reinforce the bag.
2. You will need to take two more magazine page and cut it in half. These halves will be attached to the top of the already-attached pages, giving you a larger surface area. You have four pieces because you need two layers of paper for bag thickness, so glue the edges together. The height of the bag should be 14.5″. So now you will have a surface area of 17.5″ x 14.5″.
3. Next you will measure 1.5″ from the top and fold making a flap. Then at the bottom of the large rectangle, measure 2″and make a fold.
4. Now you need to take the rectangle and fold it in half. Then measure across from left to right: 5″/3.5″/5″/3.5″/0.5″. These will establish the width and depth of your bag. Once you’ve measured, make fold creases at each measurement going down. After these steps you may add pieces of cardboard/card-stock just below your 1.5″ flaps for reinforcement, because this is where your handles will go. But be sure to glue down your 1.5″ flaps before you move on to Step #5.
5. Glue the 0.5″ flap to the 5″ section. This is important because this is what brings the whole bag together!
6. Now you need to refold the bottom 2″ flap; the creases need to be deep so you can get to Step #7.
7. Reshape into the tube-like shape. Then take the bottom flap, folding it in like a present. Attach with tape at the bottom and on the inside. Cut a piece of cardboard/card-stock to fit the bottom of the bag for more reinforcement. Glue the cardboard/card-stock inside the bag.
8. Position the bag upright and punch two holes on the rim of the bag. String the hemp twine through the holes to form handles. Finally, tie tight knots at the end of the twine on the inside to secure the handles.
9. Then fold in the sides and pinch the top together to give your bag the “gift bag shape.” That’s it! You now have a wine gift bag, and you finally put your old magazines to good use!